Quick method to stop bleeding on fingers
To stop bleeding quickly, direct pressure or pressure dressing can be used. For larger wounds, hemostasis through suturing may also be an option—all of which are effective in controlling bleeding. Taking pressure dressing as an example, the procedure is as follows:
1. Position the patient lying down or sitting, in a posture that fully exposes the wound.
2. Check whether foreign objects such as dirt, gravel, or dust are present within the wound, and carefully remove them using tweezers. Any foreign material on the surrounding skin should also be thoroughly cleaned to ensure full exposure of the wound. If necessary, soap and water may be used for cleaning.

3. After removing all foreign materials, the operator should first irrigate the wound with hydrogen peroxide, then rinse it with normal saline. Repeat this process several times until the wound is essentially clean. During irrigation, ensure that the solution flows from a higher to a lower area of the wound.
4. Once the wound has been rinsed, use surgical scissors to remove any necrotic tissue inside the wound, creating clean, even wound edges. If certain patients experience severe pain, local anesthesia may be administered to alleviate discomfort.
5. Cover the wound with a sterile dressing, then place a pad made of gauze, cotton, towel, or folded clothing of appropriate size over the dressing.
6. Securely wrap the area with bandages, triangular bandages, or similar materials until bleeding stops.
If the hand wound is large and bleeding cannot be controlled effectively, surgical suturing should be performed to achieve hemostasis and promote rapid wound healing. Additionally, the wound site must be protected—keep it dry and avoid moisture to prevent further infection.