Video on how to use a silicon-based glucose meter

Silicon-based glucose monitor refers to the Silicon Dynamic Glucose Monitor. The Silicon Dynamic Glucose Monitor is suitable for diabetic patients of all types and enables continuous monitoring of blood glucose fluctuations throughout the day. It is recommended to use the Silicon Dynamic Glucose Monitor under medical guidance. The specific operating steps are as follows:

1. Prepare the tools: Take out the sensor, disinfectant wipes, applicator, and other necessary items.

2. Disinfection and application: Open the packaging of the disinfectant wipe, remove the wipe, and clean an area on the arm rich in interstitial fluid to disinfect it. After disinfection, firmly attach the applicator with the sensor. After separating them again, a needle will appear on the applicator. At this point, remove the safety lock at the back of the applicator, place the applicator onto the disinfected site, press down firmly once, and the sensor will be successfully implanted.

3. Check readings: Connect to your smartphone, scan to activate, and then you can view the blood glucose reading. After disinfection, align the applicator precisely over the disinfected site, press straight down vertically, and keep it level to prevent the needle from loosening.