Instructions for Using a Blood Glucose Analyzer
May 24, 2023
Source: Cainiu Health
Dr. Zhang Renling
Introduction
A blood glucose meter is used in vitro to measure the concentration of blood glucose in fresh capillary whole blood, enabling rapid monitoring of blood glucose levels in diabetic patients. The specific operating steps are as follows: Remove the blood glucose test strips, lancing device, blood glucose meter, alcohol swabs, and other supplies, then install the battery into the blood glucose meter. After successful installation, the blood glucose meter will power on automatically.
A blood glucose meter is used in vitro to measure the concentration of blood glucose in fresh capillary whole blood, enabling rapid monitoring of blood glucose levels in diabetic patients. The specific operating procedures are as follows:
1. Preparation: Retrieve the blood glucose test strips, lancing device, blood glucose meter, alcohol swabs, and other necessary items. Install the battery into the blood glucose meter; once properly installed, the meter will power on automatically.
2. Install the lancing device and test strip: Unscrew the cap of the lancing device, insert a lancet, then screw the cap back on. Pull the rear end of the lancing device and press the central button to adjust the depth setting of the lancet. Meanwhile, remove a test strip and insert it into the blood glucose meter according to the direction indicated by the arrow on the strip.
3. Disinfect and collect blood sample: Use an alcohol swab to disinfect the intended puncture site. Then position the lancing device against the site and press the release button to obtain a drop of blood from the fingertip.
4. Read the result: Hold the blood sample against the side of the sampling area on the blood glucose meter; the device will automatically draw in the blood. After a few seconds, the blood glucose meter will display the measurement result.
During use of the blood glucose meter, handle the test strips carefully and store them properly to prevent moisture exposure, which could affect testing accuracy.
